Filter
Top Products
STEP 3 (See Diagram 3)
A.) Attach the two Upholstery Pads (#20) to the Handle Adjustment Frame (#16). Secure
each pad with two M8 x 1 ½” Allen Bolts (#18) and ∅ ½” Washers (#17).
B.) Attach the Foot Plate (#26) to the Akimbo Frame (#14). Securely tighten it with two
M10 x 1 3/4” Allen Bolts (#25), ∅ ¾” Washers (#3), and M10 Aircraft Nuts (#2).
C.) Insert one Foam Tube (#23) halfway through the hole on the Foot Adjustment Frame
(#24). Insert one Foam Tube halfway through the hole on the Akimbo Frame (#14).
Push four Foam Rolls onto the Tubes. Plug four ∅ 1” Foam Roll End Caps (#21) to
each end of Foam Roll.
DIAGRAM 3
6