Filter
Top Products
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Adjustable Wrench and Allen
Wrench
NOTE: It is strongly recommended this machine to be assembled by two or
more people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Attach the Main Frame (#33) to the Rear Stabilizer (#22). Secure it with two M10
x 3 ½” Carriage Bolts (#23), ∅ ¾” Washers (#5) and M10 Aircraft Nuts (#30).
Repeat the same step to install the Front Stabilizer (#38).
B.) Attach the Seat Pad (#17) to the Seat Support (#18). Secure it with two M8 x 1
3/8” Allen Bolts (#45) and ∅ ½” Washers (#15). Attach the Seat Frame (#18) to
the Main Frame (#33). Secure it with two M10 x 3 ¾” Carriage Bolts (#29), ∅ ¾”
Washers (#5) and M10 Aircraft Nuts (#30).
C.) Attach the Foot Plate (#31) to the Main Frame (#33). Secure it with three M10 x
1” Allen Bolts (#11) and ∅ ¾” Washers (#5).
DIAGRAM 1
4