Filter
Top Products
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Adjustable Wrench and Allen
Wrench
NOTE: It is strongly recommended this machine to be assembled by two or
more people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Insert the Handle (#7) into the Handle Grip (#6). Insert the Handle into the
opening hole on the Left and Right Seat Support (#3) & (#4).
B.) Attach the Left and Right Seat Support (#3) & (#4) to the brackets on the Rear
Stabilizer (#2). Secure each Support with two M10 x ¾” Allen Bolts (#9) and ∅ ¾”
Washers (#8). DO NOT tighten the bolts yet.
C.) Attach the other end of Left and Right Seat Supports to the brackets on the Front
Stabilizer (#1). Secure each end with two M10 x ¾” Allen Bolts (#9) and ∅ ¾”
Washers (#8).
D.) Place the Backrest Pad (#5) on the Left and Right Seat Supports. Secure it with
four M8 x 3” Allen Bolts (#10) and ∅ ½” Washers (#11).
E.) Secure tighten all the nuts and bolts previously installed.
DIAGRAM 1
4