Filter
Top Products
ASSEMBLY:
STEP 1:
Attach the FRONT STABILIZER (#2) to the
MAIN FRAME (#1). Securely tighten with two
CARRIAGE BOLTS, WASHERS AND NUTS
(B).
Attach the REAR STABILIZER (#3) to the
MAIN FRAME (#1). Securely tighten with two
CARRIAGE BOLTS, WASHERS AND NUTS
(B).
STEP 2:
Insert the COMPUTER WIRE (#4) & SENSOR
WIRE (#14) through the COMPUTER POST
(#7).
Note: The white socket of the wire must remain
on the top (RIGHT) of the POST.
STEP 3:
Connect the COMPUTER WIRE (#7) &
SENSOR WIRE (#14) with the wires from
the MAIN FRAME (#1).
5