Filter
Top Products
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and One
Philips Screwdriver.
NOTE: It is strongly recommended two or more people assembling this machine to
avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the Front Support (#5) to the Main Seat Support (#3). Secure the front hole
with one M8 x 1 5/8” Carriage Bolt (#28), Ø5/8” Washer (#26), and M8 Aircraft Nut
(#24). Secure the other hole with one M8 x 1 ¾” Carriage Bolt (#29), Diagonal Support
(#4), Ø5/8” Washer (#26), and M8 Aircraft Nut (#24).
B.) Secure the other end of Diagonal Support (#4) to the Front Support (#5) with one M8 x
2 1/8” Hex Bolt (#30), Ø5/8” Washer (#26) and M8 Aircraft Nut (#24).
C.) Connect the Main Seat Support (#3) to the Cross Brace (#2). Secure it with four M8 x
2 3/8” Hex Bolts (#18), one Bracket (#10), four Ø5/8” Washers (#26), and four M8
Aircraft Nuts (#24).
DIAGRAM 1
4
STEP 2 (See Diagram 2)