Filter
Top Products
19
THE INFORMATION MODE/DEMO MODE
T
he console features an information mode that keeps
track of treadmill usage information. The information
m
ode also allows you to select miles or kilometers as
the unit of measurement and to turn on and turn off the
demo mode.
To select the information mode, hold down the Stop
button, insert the key into the console, and then release
the Stop button. When the information mode is se-
lected, the following information will appear in the dis-
play:
The upper part of
the display will
show the number
of
thousands of
steps taken by all
users of the
treadmill. The
center of the dis-
play will show the
total number of miles or kilometers that the walking belt
has moved. The lower part of the display will show the
total number of hours that the treadmill has been oper-
ated. In addition, an “E” for English miles or an “M” for
m
etric kilometers will appear in the lower part of the dis-
play. To change the unit of measurement, press the
S
peed increase button.
IMPORTANT: If a “d” appears in the display, the con-
sole is in the “demo” mode. This mode is intended to be
used only when a treadmill is displayed in a store.
When the console is in the demo mode, the power cord
can be plugged in, the key can be removed from the
console, and the indicators in the display will automati-
cally appear in a preset sequence, although the but-
tons on the console will not operate.
If a “d” appears
when the information mode is selected, press the
Speed decrease button so “d” disappears.
To exit the information mode, remove the key from the
console.