Filter
Top Products
13
23. Turn the Seat (14) as shown. Attach the wide end of
the Seat to the bracket on the Seat Support Tube
(37) with two M6 x 16mm Screws (3).
Tilt the Seat Support Tube (37) upwards and attach
the narrow end of the Seat (14) to the Seat Support
Tube with an M6 x 38mm Bolt (60) and an M6
Washer (30).
23
60
30
3
37
14
24. Make sure that all parts are properly tightened before you use the weight bench. The use of all
remaining parts will be explained in ADJUSTING THE WEIGHT BENCH starting on the following page.