Filter
Top Products
iLuv | 22iMM9400/9500 | V10M10_IM_EN_06050921 | iLuv
OPERATIONAL INSTRUCTIONS
CD and MP3 CD Operation - continued
OPERATIONAL INSTRUCTIONS
CD and MP3 CD Operation - continued
3. Press or to select the track to be programmed.
4. Press TIMER/MEMORY to save the track in the rst program location. For example, if you selected
track number 14, it will appear in Program position 1 as shown below.
5. For the next program position, select another desired track (It is not necessary to select CD if the
track is in the same CD).
6. Conrm the selection using the TIMER/MEMORY.
7. To program other tracks in the memory, repeat steps 3 - 6.
To play the program, press . The program can be played back again as long as “MEMORY” appears
on the display.
To clear the programming and resume normal playback
The programming is erased by pressing FM MODE/ until the “MEMORY” display disappears,
or by opening the CD changer door. If the unit is switched o, the program is erased.
Notes
1. RANDOM will not function in programmed play.
2. This unit counts all the folders on an MP3 disc, even if a folder doesn’t contain any MP3 le(s).
If you select a folder which doesn’t contain any MP3 le(s), the unit will automatically skip to the
next folder until it nds one containing an MP3 le(s).
Program memory for MP3 CDs
The built-in program memory enables up to 40 titles to be played from one disc in the order of your
choice. Any title can be stored more than once within one program.
1. Load the CDs.
2. Press TIMER/MEMORY in the stop mode to switch to programming mode.
3. Select the desired folder (album) by repeatedly pressing or .
4. Select the desired track by pressing or to select:
5. Conrm selection using TIMER/MEMORY to save the track in the rst location.
6. To store the remaining titles in the memory, repeat Steps 3-5.
To play back the program, press . When is pressed, the program can be played back again
as long as “MEMORY” appears on the display.
To clear the programming and resume normal playback
The programming is erased by pressing FM MODE/ in the programming mode (until “MEMORY”
display disappears), or by opening the disc compartment.
Note: is not used for programming.
ID3 TAG (Artist/Title)
1. When an MP3 disc is playing, MP3 INFO repeatedly. The track no., title and artist information
will be shown in the display if disc information is available.
2. To resume normal play display, press MP3 INFO repeatedly until playing time reappears.