iFit 790t Treadmill User Manual


 
20
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
s
tereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the con-
s
ole through the audio jack.
To use the audio jack, locate the audio wire and plug it
into the audio jack near the speakers. Then, plug the
audio wire into a jack on your MP3 player, CD player,
or other personal audio player. Make sure that the
audio wire is fully inserted.
Next, press the Play
button on your MP3
player, CD player, or
other personal audio
player. Adjust the vol-
ume on your personal
audio player or with the
Vol increase and de-
crease buttons on the console. Note: If the volume
cannot be turned up, make sure the volume level is
not set at 0 (see THE INFORMATION MODE on this
page).
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat
surface instead of on the console.
HOW TO ADJUST THE CUSHIONING SYSTEM
Remove the key from the console and unplug the
p
ower cord. The treadmill features a cushioning sys-
tem that reduces the impact as you walk or run on the
t
readmill. To increase the firmness of the walking plat-
form, step off the treadmill and slide the platform cush-
ions toward the front of the treadmill. To decrease the
firmness, step off the treadmill and slide the platform
cushions toward the back of the treadmill. Note: Make
sure that both cushions are set at the same firm-
ness level. The faster you run on the treadmill, or
the more you weigh, the firmer the walking plat-
form should be.
Volume Decrease
Volume Increase
Platform
Cushion
Walking Platform
Increase
Decrease
Platform
Cushion