Filter
Top Products
26
P/N 211636C 07/03
1.
Apply height adjustment and moving label (54) to front of pole as shown.
TWO PEOPLE
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD
RESULT IN SERIOUS
INJURY AND/OR
PROPERTY
DAMAGE.
WARNING!
DO NOT ALLOW
CHILDREN TO ADJUST
HEIGHT.
WARNING!
2.
A. While holding handle, remove pin (26).
B. Move elevator up or down to desired height.
C. Replace pin (26) full length to lock system at desired height.
SECTION C: APPLY HEIGHT AND MOVING LABEL & HEIGHT ADJUSTMENT
Peel protective film from
surface of acrylic
backboard prior to use.
NOTE:
54
10 ft.
(3.05 m)
26
A.
B.
C.
28