Filter
Top Products
18
P/N 21192302 07/04
16.
36
20
35
21
34
37
Install spacers (36) onto backboard brackets (34) with bolts (37, 21) and lock-nuts
(35, 20) as shown.
Assemble lower elevator tubes (40) as shown.
NOTE: Test fit bolts into holes of brackets (34) and carefully rock them in a circular
motion to ream out paint from holes if necessary
17.
40
40
47
41
34
55
55
39
IMPORTANT!:
Refer to instructions
included with board and rim
hardware for backboard and
rim assembly.
IMPORTANT!:
It is necessary for all
p
arts to be inst
alled for
this mechanism to work
safely and properly.