Filter
Top Products
4
P/N 205932 5/99
Mark pole sections
with tape as shown.
1.
1
3
2
2.
TOP
MIDDLE
BOTTOM
5” (13 cm)
3.
IMPORTANT! Add
bottom pole section (3) to
assembly as shown.
Bounce pole sections
together 3 times, rotate 90°
and repeat rotation bounce
procedure. Continue this
step until pole sections are
completely tight.
NOTE: Pole sections
should have a 4-3/4"
(12 cm) minimum overlap.
5” (13 cm)
IMPORTANT! Bounce
pole top (1) and middle
section (2) together as
shown until they no longer
move toward taped
reference mark. Upright
assembly.
NOTE: Pole sections
should have a 4-3/4"
(12 cm) minimum
overlap.
1
2
1
2
34” (86.4 cm)
3
IMPORTANT! WRITE DOWN MODEL NUMBER FROM BOX ON PAGE 1 OF THIS OWNERS MANUAL
NOTE: Two people recommended
for this step. Lift front panel (4) and
insert tank (6) into base (5) as
shown.
4.
HUFFY
SPORTS
4
5
4
6
5
WOOD SCRAP