Filter
Top Products
3
04/03 P/N 211657B
IMPORTANT! WRITE DOWN MODEL NUMBER FROM BOX ON PAGE 1 OF THIS OWNERS MANUAL
1.
Carefully, position front tank (1) upside down. Secure wheel (2) into place from bottom side (illust. A)
making sure the wheel bracket (5) seeds into base as in illust. B. Repeat procedure for opposite wheel. Finger tighten,
then upright assembly.
2.
Correctly identify each pole section
and mark tape as shown.
TOP
MIDDLE
BOTTOM
3.
5” (13 cm)
35-1/2”
(90.2 cm)
5” (13 cm)
Remove all parts from packing material and separate tanks from the shipping position.
8
7
9
LARGE
HOLE
LARGE
HOLE
BOTTOM VIEW
Wood Scrap
5.
4.
IMPORTANT! Bounce
pole top (7) and middle
section (8) together as
shown until they no longer
move toward taped
reference mark. Upright
assembly.
NOTE: Pole sections
should have a 3-3/4"
(9.5 cm) minimum
overlap.
7
8
IMPORTANT! Holes in
top (7) and bottom pole (9)
sections MUST ALIGN to
correctly position elevator
system toward playing
surface. Add bottom pole
section (9) to assembly as
shown and bounce until
completely tight.
NOTE: Pole sections
should have a 3-3/4"
(9.5 cm) minimum
overlap.
8
7
5
6
3
9
4
SIDE VIEW
5
6
2
3
1
BOTTOM VIEW
4
B
A