Filter
Top Products
05/03 P/N 211994B
11
10
6
7
8
6.
2
28
28
3
3
9
Install wheel axle (2) through wheel carriage (9). Install wheels (3) onto wheel
axle (2) with spacers (28) as shown. Insert pole assembly into tank assembly
as shown. Secure bottom pole (6) to tank and wheel bracket as shown.
A
deep socket is recommended. IMPORTANT! DO NOT OVER TIGHTEN.
TWO PEOPLE
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD
RESULT IN SERIOUS
INJURY AND/OR
PROPERTY
DAMAGE.
WARNING!
11
13
1
14
13
12
12
7.
Secure tank struts (13) to pole.
Rotate non-secured ends of tank
struts (13) outward to mounting
holes in tank as shown.
TIGHTEN BOLT (11) IN
LOCK NUT (12) UNTIL
FLUSH (EVEN) WITH
LOCK NUT’S OUTER
EDGE.
WARNING!
THE SPACER (28) WILL
FIT LOOSELY UNTIL
SECURED INTO THE
CAVITY OF THE BASE.
IMPORTANT!: