Filter
Top Products
01/06 ID# M732201
21
14.
Roll the completed assembly to the desired playing area. Fill tank with 33 gallons of water.
15.
Apply the height adjustment and moving label (25) to the front of the pole as shown.
24
24
10 ft.
(3.05 m)
25
TWO CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING
COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
WARNING!
DO NOT ALLOW
CHILDREN TO
ADJUST HEIGHT.
WARNING!
DO NOT LEAVE
ASSEMBLY
UNATTENDED WHEN
EMPTY; IT MAY TIP
OVER.
WARNING!
IF USING SAND:
2 GALLONS OF
ANTI-FREEZE IS
NOT
REQUIRED
NOTE:
SAND
SAND
(360 lb.)
(360 lb.)
(163 kg)
(163 kg)
522730 06/05
MOVING
SYSTEM
HEIGHT ADJUSTMENT
TO RESET OR REPOSITION BACKBOARD:
1. Grasp handle firmly and pull down to raise rim PAST
highest position (above 10 feet).
2. While still holding handle firmly, CAREFULLY lower
rim to lowest position.
3. Raise to desired height by pulling down on handle.
READ BEFORE
OPERATING
ELEVATOR
SYSTEM
CAUTION!
DO NOT LET GO OF HANDLE
UNTIL THE RIM IS RESET AT
LOWEST POSTION OR
DESIRED HEIGHT.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
1. Adjust basketball
backboard height to
lowest position.
2. While holding pole,
rotate basketball
system forward until
wheels engage with
ground.
3. Move basketball
system to desired
location.
4. Carefully rotate
basketball system
upright.
5. Check system for
stability.
1.
3.
2.
HEIGHT ADJUSTMENT
TO RESET OR
REPOSITION
BACKBOARD:
1. Grasp handle firmly and
pull down to raise rim
PAST highest position
(above 10 feet).
2. While still holding handle
firmly, CAREFULLY lower
rim to lowest position.
3. Raise to desired height
by pulling down on
handle.