Filter
Top Products
05/03 P/N 211689C
9
SECTION A: ASSEMBLE THE POLES
2.
1.
Wood Scrap
2
1
5"
(13 cm)
5"
(13 cm)
1
3
2
Correctly identify each pole section. Mark pole sections with tape as shown.
TAPE
TAPE
Bounce middle pole section (2) into top pole section (1) together using a wood scrap
as shown until they no longer move toward taped reference mark.
NOTE: Pole sections should have a 3-1/2" (9 cm) minimum overlap.
Position middle pole so
that the warning label
is on the same side as
the 1/2" (cm) diameter
holes of the top pole.
IMPORTANT!: