Filter
Top Products
12
P/N 214953C 12/03
IMPORTANT! Center
alignment slot of lower pole
section (6) in a lower hole of
middle pole section (5) as in
step 3. While maintaining
alignment, bounce top &
middle pole assembly (4 & 5)
onto lower pole section (6) as
shown until top & middle pole
assembly no longer moves
toward taped reference mark
on bottom pole.
5
4
4
5
6
WOOD SCRAP
(NOT SUPPLIED)
IMPORTANT! Center alignment slot of
middle pole section (5) in a lower hole of
top pole section (4) as shown. While
maintaining alignment, bounce middle pole (5)
into top pole section (4) as shown until top
pole section no longer moves toward taped
reference mark on middle pole. Upright
assembly.
WOOD SCRAP
(NOT SUPPLIED)
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM)
MINIMUM OVERLAP.
NOTE:
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM)
MINIMUM OVERLAP.
NOTE:
4.
5.