Filter
Top Products
10
P/N 211387 5/99
printed on recycled paper
TO PLACE IN THE STORAGE POSITION
Lower backboard and rim down to the
lowest position (7
1/2
’ (2.29 m)).
Remove adjustment knob (9), washer
(8), and carriage bolt (7). Carefully
rotate pole downward towards
ground.
DO NOT STAND BEHIND
SYSTEM WHEN PREPARING
FOR STORAGE.
WARNING
1.
2.
3.
Secure pole assembly to tank (1) with carriage
bolt (7), washer (8), and adjustment knob (9).
Remove adjustment knob (24) from swivel
bracket (21) and carefully rotate backboard
assembly 180º.
7
8
9
PLAY
POSITION
STORAGE
POSITION
1
Secure backboard assembly in storage position
with adjustment knob set (24 and 8) as shown.
4.
24
8
HEIGHT ADJUSTMENT
SUPPORT TABLE
7
Rest unit on support table.
Remove adjustment knob (9),
carriage bolt (7), and washer (8)
to extend or retract pole. Pole
adjusts from 71/2’ to 10’.
Re-Insert Adjustment set
(7, 8, 9) When pole is at
desired height.
9
1.
8
BACKBOARD AND TOP POLE
MAY ROTATE DURING
HEIGHT ADJUSTMENT.
WARNING