Filter
Top Products
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
A S S E M B LY S T E P 3
HARDWARE BAG 3 CONTENTS :
STEPS A-C
STEPS D-G
A Open HARDWARE BAG 3.
B Align CROSS BAR with holes in
CONSOLE MAST
.
C Insert 1 BOLT (E), 1 SPRING
WASHER (F) and 1 WASHER
(G) into the bottom holes of
the CROSS BAR.
NOTE: Do not insert the top
bolts until Step 3-F, after
the STORAGE RACK has been
attached.
D Attach 2 SLEEVES (I) to BOLTS
(J). Insert 2 BOLTS (J) into
CONSOLE MASTS
.
E Slide STORAGE RACK over
SUPPORT BAR and snap
bottom of STORAGE RACK
to
BOLTS (J)
.
F Now you may insert the top 2
BOLTS (E) into the
SUPPORT
BAR. Tighten all 4 BOLTS (E).
G Attach STORAGE RACK to
CROSS BAR using 5
SCREWS
(H).
10