Filter
Top Products
21
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
U S E R FAV O R I T E K E Y S
The user favorite keys allow up to two programs and program settings to be saved into memory. Using a
favorite key enables you to begin your favorite program quickly. To set a user FAVORITE KEY, follow the steps
as listed in the “SETTING FAVORITE KEYS” section.
SETTING FAVORITE KEYS:
1) Press and hold the FAVORITE 1 or FAVORITE 2 key for five seconds until you
hear three beeps. The LED inside the FAVORITE KEY will be flashing.
*NOTE: The FAVORITE KEYS can not be programmed if you are already in a
program.
2) Select preferred program using the PROGRAM KEYS and press ENTER.
*NOTE: The CUSTOM PROGRAM (P5) can not be saved into a FAVORITE KEY.
3) For P1, set TIME, INCLINE, and SPEED using the +/- KEYS and press ENTER
after setting each value. For programs P2 through P4, set LEVEL and TIME
using the +/- KEYS and press ENTER after setting each value. For P6, set
TARGET HEART RATE and TIME using the +/- KEYS and press ENTER after
setting each value.
4) After you have selected your settings, press the FAVORITE KEY to save
the settings or press START to begin your program and your settings will
automatically be saved.
USING A FAVORITE KEY:
After you have programmed a FAVORITE KEY as listed in the “SETTING
FAVORITE KEYS” section, you may use the favorite key. Press the desired
FAVORITE 1 or FAVORITE 2 key then press START to begin the program.
*NOTE: The FAVORITE 1 and FAVORITE 2 keys may only be used before starting
a program. The keys will not function while in a program.