Horizon Fitness ELITE 3.0R Home Gym User Manual


 
KNOW YOUR RECUMBENT BIKE
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our bikes so lubrication is not needed. The most important main-
tenance step is to simply wipe your perspiration off the bike after each use.
HOW DO I CLEAN MY HORIZON FITNESS SEMI-RECUMBENT BIKE?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your Horizon Fitness recumbent bike and its operating environment will keep mainte-
nance problems and service calls to a minimum. For this reason, Horizon Fitness recommends that the
following preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
Turn off the recumbent bike with the on/off switch, and unplug the power cord from the wall outlet.
(Elite 3.0R Only)
WARNING!
To remove power from the recumbent bike, the power cord must be disconnected from the wall out-
let.
Never use solvents, as they can cause damage to the recumbent bike.
Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
Make sure the power cord is not underneath the recumbent bike or in any other area where it can
become pinched or cut.
EVERY WEEK
Clean underneath the recumbent bike, following these steps:
Turn off the recumbent bike with the on/off switch, then unplug the power cord at the wall outlet.
(Elite 3.0R Only)
Move the recumbent bike to a remote location.
Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
recumbent bike.
Return the recumbent bike to its previous position.
EVERY MONTH
Inspect all assembly bolts of the machine for proper tightness.
ROUTINE MAINTENANCE
PEDALS
CONSOLE
CONSOLE MAST
TENSION
KNOB
CONSOLE MAST
BOOT
FRONT
FOOT
TUBE
GRIP PULSE
ADJUSTABLE SEAT
LEVER
SEAT
TRANSPORT
WHEEL
REAR SUPPORT
TUBE
SIDE COVERS
HANDLEBARS
SUPPORT
TUBE
LEVELER
WARNING
9 ELITE 2.0R 26 ELITE SERIES
elite series recumbent owner’s guidev1.1.qxd 10/13/2003 11:49 AM Page 10