Horizon Fitness 4.3E Treadmill User Manual


 
BEFORE
YOU BEGIN
ASSEMBLY
13
INTRODUCTION
IMPORTANT
PRECAUTIONS
ELLIPTICAL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
A S S E M B LY S T E P 6
GUIDE RAIL
LOWER LINK ARM
SPACER
TEFLON WASHERS
LOWER
HANDLEBAR
LOWER LINK ARM
TEFLON WASHERS (O)
SPACER (P)
L0WER HANDLEBAR
NUT (Q)
BOLT (N)
A) Open HARDWARE BAG FOR
STEP 6.
B) Insert SPACER (P) into LOWER
LINK ARM.
C) Insert 2 TEFLON WASHERS (O)
between the LOWER LINK ARM
and LOWER HANDLEBAR.
D) Attach LOWER LINK ARM to
LOWER HANDLEBAR using
BOLT (N) and NUT (Q).
E) Attach INSIDE & OUTSIDE
ELBOW COVERS together using
2 SCREWS (R).
F) Repeat on other side.
NOTE: If you have difficulty
fitting the lower link arm into
the lower handlebar bracket,
slide the roller wheel forward
or backward on the guide
rail for better access to the
bracket.
BOLT (N)
60 mm
Qty: 2
SPACER (P)
44 mm axis
Qty: 2
NYLON
NUT (Q)
Qty: 2
TEFLON WASHER (O)
28 mm
Qty: 4
SCREW (R)
15 mm
Qty: 4
HARDWARE BAG FOR STEP 6 CONTENTS :
SCREW (R)
SCREW (R)
INSIDE ELBOW COVER
OUTSIDE ELBOW COVER