Filter
Top Products
HOIST FITNESS SYSTEMS
GENERAL MAINTENANCE INFORMATION
Links, Pull-Pins, Snap Hooks, Swivels, Weight Stack Pins:
Check all pieces for signs of visible wear or damage.•
Check springs in snap hooks and pull-pins for proper tension and alignment.•
If the spring sticks or has lost its rigidity, replace it immediately.•
Upholstery:
To ensure prolonged upholstery life and proper hygiene, all upholstered pads should be wiped •
down with a damp cloth after every workout.
Periodically take the time to use a mild soap or an approved vinyl upholstery cleaner to deter the •
onset of cracking or drying. Avoid using any abrasive cleaners or cleaners not intended for use
on vinyl.
Replace ripped or warn upholstery immediately.•
Keep sharp or pointed objects clear of all upholstery.•
Decals:
Inspect and familiarize yourself with any safety warnings or other user information posted on •
each decal.
Nuts and Bolts:
Inspect all nuts and bolts for any loosening and tighten if needed.•
Go through a re-tightening sequence periodically to ensure that all hardware is tensioned proper.•
Anti-Skid Surfaces:
These surfaces are designed to supply secure footing and need to be replaced if they appear •
worn or become slippery.
Belts and Cables:
Hoist uses only high quality belt, and mil-spec cables.•
Visually inspect the belts and cables for fraying, cracking, peeling or discoloration.•
While the machine is not in use, carefully run your fingers along the belt or cable to feel for •
thinning or bulging areas.
Replace belts and cables immediately at the first signs of damage or wear. Do not use equipment •
until belts or cables have been replaced.
OWNER'S MANUAL
PAGE 28
RS-1301 ASSEMBLY