Filter
Top Products
www.smoothfitness.com
35
COMPUTER OPERATION
When the TIME counts down to 0, the HEART RATE CONTROL program is completed and the computer enters a one-
minute COOL DOWN program.
After the COOL DOWN program the computer will return to POWER ON status.
The purpose of HEART RATE CONTROL program is to keep the user’s pulse between 65% of the max. heart rate and 85%
of the max. heart rate to achieve the most efficient workout result.
C1 – C3 CUSTOM PROGRAM (USER PROGRAM)
The program can allow 3 custom programs to be set by users and store the settings for repeated workouts. The maximum
workout time of each user program is 60 minutes. During the workout after the TIME counts up to 60:00, the treadmill will
start a one-minute cool down procedure automatically. To set and store the user programs, please follow the procedure
below:
SET AND SAVE THE USER PROGRAM
Select between C1 to C3 and press the STOP/ENTER button
to enter the user program then press the START button.
Speed starts at 3.2 km/h / 2.0 mph and the incline level starts
at level 0. Each section of SPEED/INCLINE is one minute.
Press the SPEED UP/DOWN buttons to change the speed
and press the INCLINE UP/DOWN buttons to change the
incline during the workout. The computer will take the actual
speed and incline level at the last second of each minute
section and temporary save as the speed and incline level of
that minute section. Continue the workout until you want to
stop. Press the STOP/ENTER button to enter the one-
minute cool down session. The computer will automatically
enter the save program status after the one-minute cool
down session. If you want to skip the cool down procedure,
press the STOP/ENTER button to enter the save program
status.
When the computer is in save program status, the “CUSTOM SAVE” button will blink slowly. Press the button to save this
program or press the STOP/ENTER button to delete the program and return to POWER ON status.
EDIT PREVIOUS SAVED PROGRAM
Edit the Speed and Incline without extending the previously saved workout time:
Simply press the SPEED UP/DOWN and INCLINE UP/DOWN buttons to change the speed and incline level during the
workout then follow the SET AND SAVE procedure after completing the workout.
Extend the workout time from the previously saved program:
If you want to extend the total workout time from the previously saved program press the START button anytime during the
workout. The LED of the CUSTOM SAVE button will light up and blink for 10 seconds then stay lit up. After completing the
previously saved program the treadmill will start a one-minute cool down session. Press the START button again during the
cool down session and the treadmill will skip the cool down procedure and continue running at a speed of 3.2 km/h / 2.0 mph
and incline of level 0. Press the SPEED UP/DOWN and INCLINE UP/DOWN buttons for every minute section then follow the
SET AND SAVE procedure after completing the workout.
If you already press the START button once during the workout and intend to extend the workout time but decide not to
extend the workout time, press the START button again to switch off the LED light of CUSTOM SAVE button. Or wait till the
previous saved program complete and complete the cool down procedure then follow the SET AND SAVE procedure.