Filter
Top Products
6
Self Test Error Codes
Self Test Error Codes
1041 RS232 RI stuck low or high
1042 RS232 DSR stuck low or high
1043 RS232 CTS stuck low or high
1044 RS232 Rx too many bytes
1045 RS232 Tx time out
1046 RS232 Rx too few bytes
1047 RS232 Tx/Rx data failure
1052 HPIB driver chip fails
1060 RTC set incorrectly
1061 RTC not ticking correctly
1070 Parallel Port failed to send data
1080 Internal printer fails
1081 Keybd proc internal RAM fails
1082 Keybd proc external RAM fails
1083 Keybd proc ROM fails
1084 Front panel no response
1085 Front panel command not ok
1086 Front panel returned an invalid error number
1087 Front panel cpu or UART error
1088 Cannot detect front panel printer
1090 VRAM data error
1100 DISK : no disk in drive
1101 DISK : disk is full
1102 DISK : disk write failure
1103 DISK : disk read failure
1104 DISK : disk verify read/write failure
1110 LAN failed 'power on' test
1111 LAN test returned an invalid error number
1112 No LAN hardware found
1113 LAN fitted, no test result available
1120 Front panel no response
1121 Front panel command not ok
1122 Front panel returned an invalid error number
1123 Dual Port SRAM data error
1124 Dual Port SRAM address error
1130 Front panel no response
1131 Front panel command not ok
1132 Front panel returned an invalid error number
1133 Front panel FEPROM sum-check error
1140 Front panel no response
1141 Front panel command not ok
1142 Front panel returned an invalid error number
1143 Front panel SRAM data error
1144 Front panel SRAM address error
1145 Front panel : requested address range not valid
1150 Front panel no response