Filter
Top Products
ASSEMBLY
T
o hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires your own Phillips screw-
driver , adjustable wrench , wire cutters , and needlenose
pliers .
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
To identify small parts during assembly, use the part identification drawings on page 27.
6
1. Make sure that the power cord is not plugged in.
With the help of a second person, carefully tip the
treadmill onto its left side. Partially fold the Frame (12) so
that the treadmill will be more stable. Do not fully fold
the treadmill until it is completely assembled.
Attach two Base Pads (97) to the bottom of the Base (82)
with two 1” Tek Screws (56). Attach a Wheel (95) to the
outside of the Base with a Wheel Bolt (86) and a Wheel
Nut (15).
82
15
86
97
1
56
95
56
97
12
2. Identify the Left Upright (9), which has two small holes
for the Latch Housing (77). If the Latch Housing is not at-
tached to the Left Upright, remove the two Screws (76)
from the Left Upright. Attach the Latch Housing as shown
with the two Screws. Firmly tighten—but do not over-
tighten—the Screws.
Locate the Right Upright (10). See drawing 2b. Have a
second person hold the Right Upright near the Wire
Harness (17). Insert the end of the Wire Harness into the
lower end of the Right Upright and out of the rectangular
hole near the upper end (see drawing 2a). If necessary,
use needlenose pliers to pull the Wire Harness out of the
hole.
2b
10
17
2a
17
77
76
9
10
Rectangular
Hole
Large Hole
Small
Holes