Filter
Top Products
20
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also al-
lows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The Time/Segment Time
display will show the total
number of hours that the
treadmill has been used.
The Distance/Incline display
will show the total number of
miles that the walking belt
has moved.
An E for English miles or an
M for metric kilometers will
appear in the Speed display.
Press the Speed + button to
change the unit of measure-
ment.
IMPORTANT: The
Pulse/Calories display
should be blank. If a “d”
appears in the display, the
console is in the “demo”
mode. This mode is in-
tended to be used only
when a treadmill is displayed in a store. When the con-
sole is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays and indicators on the console will au-
tomatically light in a preset sequence, although the but-
tons on the console will not operate. If a “d” appears
in the Pulse/Calories display when the information
mode is selected, press the Speed – button so the
Pulse/Calories display is blank.
To exit the information mode, remove the key from the
console.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor adds even more fea-
tures to the console. The chest pulse sensor continu-
ously monitors your heart rate during your workouts
and allows you to use the console’s two pulse pro-
grams. To purchase the optional chest pulse sen-
sor, call toll-free 1-800-734-2377.