Filter
Top Products
backdrop
base
fire
backdrop
pot
skewer
skewer holders
A
B
ASSEMBLY
Make sure you have the following item before you begin:
• Scissors
Carefully use scissors to cut out
the “Shrek Cooking Backdrop”
from the back of the package.
Cut along the dotted line around
the illustration.
Fold the two creases in the
backdrop FORWARD. The
backdrop should now be free
standing.
Step 1 Step 2
Step 3
Assembling the Candy Maker
• Lay the fireplace base in front of the backdrop. Place the fire backdrop
against the fireplace base.
• Put the cauldron pot on top of the fireplace base. Place the rotisserie
skewer holders on opposite ends of the fireplace base. Place the
rotisserie skewer on top of the rotisserie skewer holders overtop the
cauldron.
CREATING SHREK SWAMP SNACKS
Make sure you have the following items before you begin:
• Spoon
• Measuring Spoon
• Mixing Bowls
CLEANING
Before you begin, be sure to wash all parts in warm, soapy water
and rinse thoroughly. Wash after each use. Do not use dishwasher
to clean.
1. Rinse Cauldron Pot and pour 1/2 of Rat Stew packet into cauldron pot.
Add 4 1/2 teaspoons of water and mix thoroughly.
2. In a separate mixing
bowl, pour the
contents of both
SWAMP GASSES
mixes, A & B. Mix the
two powders well,
then pour 1/2 of
the mixed powder
into the SWAMP RAT
STEW to increase
the bubbling
brew effect.
MAKING THE CANDY SAUCE
1. Pour contents of 1 Critter
Mix into the Cauldron Pot.
Mix with 4 1/2 teaspoons of
warm water. Stir well for 2-3
minutes until it thickens.
2. To make 4 critters, pour
mixture into both molding
trays. Place molds in
refrigerator for 5-10
minutes.
MAKING THE CANDY
3. When brew is
bubbling in cauldron,
remove the gummy
treats from molds
with the “Magic”
wiggle fork, or
with the rotisserie
skewer, and dip them
in the cauldron.
4. Stick the gummy
with the center
prong of fork,
pushing it through
until side prongs
reach the bottom
of the gummy treat.
Squeezing the
handle portion of
the fork will make
the gummy treat
“come alive”!
3. When brew is
Press
here