Filter
Top Products
1: Turn stadium halves upside down. Slide connecting
snaps into slots on ONE STADIUM HALF ONLY (NOT
both halves!). Make sure they SNAP into place.
ASSEMBLY:
Please follow assembly instructions in proper order for best results.
4: Attach leg with flap to battery compartment end
of stadium (slide tabs on leg into slots on stadium).
To attach remaining leg, line up cover with switch,
and attach leg to stadium (slide tabs on leg into
slots on stadium).
5:
Snap center supports into holes in stadium. Attach
lever to post on end of leg with flap.
2b: Slide connecting plugs all the way into side slots
on one stadium half as shown.
3c: Turn locks
clockwise to
locked position
(arrow on lock
points away from
stadium center).
2a: Using
screwdriver, turn
locks to unlocked
position (arrow on
lock points toward
stadium center).
2c: Turn locks
clockwise to
locked position
(arrow on lock
points away from
stadium center).
3a: Using
screwdriver, turn
locks on other
half of stadium to
unlocked position
(arrow on lock
points toward
stadium center).
3b: Slide stadium halves together, sliding
connecting snaps and connecting plugs all the way
into slots on other stadium half.
lever center supports
flap
switch