Filter
Top Products
SKU 46092 For technical questions, please call 1-800-444-3353. Page 2
Specifications
Welding Protection Types For All Arc Welding Processes;
NOT for Laser Welding or Oxyacetylene Welding/Cutting
Shell Material High Impact Resistant Plastic Polyamide Nylon
Shell Colors Black
Shade Range 9 to 13; Clear State: #-3/4
Infrared Protection 780-1400 nm
Ultraviolet Protection up to shade 14 all the time
Viewing Area 6.29 Square Inch
Lens Switching Speed 1/25,000 second
Power Source Solar Cells
(rechargeable battery included, no additional battery required)
Weight 1.05 Lbs.
Power ON / OFF Fully Automatic
Operating Temperature 23 to 131° F
Storing Temperature -13 to 167° F
ANSI Approved Lens
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Do not use the Welding Helmet if the lens is cracked, if the lens or sensors are dirty,
or if the lens or front retaining frame is loose.
2. Keep work area clean. Cluttered areas invite injuries.
3. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lit. Do not use electrically-powered
tools in the presence of flammable gases or liquids.
REV 06/05