Filter
Top Products
4 Dolphin® 7900 Series Mobile Computer Quick Start Guide
Step 2: Charge the Batteries
There are two types of battery power: the main battery
pack and the backup battery located inside the terminal.
The main battery pack powers the terminal and charges
the internal backup battery.
Dolphin terminals ship with both batteries discharged of
power. Charge the main battery pack for a minimum
of four hours before initial use!
See page 5 for a complete list of Dolphin peripherals.
Note: Additional charge time is required to fully charge
the internal backup battery the first time.
Step 3: Initialize the Dolphin Terminal
Note: Do NOT press any keys while the terminal is initializing!
1. Apply power to the Dolphin terminal. The screen turns white and the LEDs
flash as the system performs a hard reset.
2. The kernel splash screen displays for a few seconds. The Build numbers
indicate software version numbers for the operating system.
3. When the Windows Mobile splash screen appears, follow the on-screen
directions using the stylus provided by Hand Held Products.
Note: When aligning the screen, press firmly into the center of the cross-hair
target once and release. Do not “double-tap” the target. Alignment should
always be performed with a stylus designed for touch screen
applications. The small point is required for accurate calibration.
4. Wait as Autoinstall begins installing programs. A status bar appears on the
screen that identifies each program as it installs.
Do NOT touch the screen or the keyboard while programs are installing!
Dolphin HomeBase
!
Use a Dolphin 7900 peripheral and the power cables
provided by Hand Held Products. Use of peripherals or
cables not sold/manufactured by Hand Held Products
will void the warranty and may damage the terminal.
Build 8.XX 8.XX 8.XX
Bootloader
Keyboard
Kernel