Filter
Top Products
1514
1"
2"
(1) The altitude is displayed in metres or feet depending on
the units selection (see "Selecting the units" on page 8).
After 30 seconds, the hands show the time again
but the digital display remains in ALTIMETER mode.
After 10 h, the digital display returns to "h-m-s" mode
(2) The adjustment shows the altimeter setting at the value
of the actual altitude. For more information,
see the explanation of the altimeter on page 20.
Validation of the setting
(2)
Activation of the glass
Adjusting the altitude
Activation of the altimeter function
Incrementation or
decrementation (1 m or 3 ft)
(1)
+ or - 1 step
1"
(1) To obtain the best reading, it is necessary to remove the watch
from your wrist and wait for approximately 15 to 30 minutes.
For more information, see the explanation of the THERMOMETER
on page 22.
(2) The temperature is displayed in degrees Celsius or in degrees
Fahrenheit depending on the units selected (see "selecting the
units" on page 8).
After 30 seconds, the hands display the time again but the digital
display remains in THERMOMETER mode.
(2)
Activation of the glass
Activation of the THERMOMETER
function
Indication of altitude in relation to sea level Indication of the temperature
(1)
A LTIMETER T HERMOMETER
Manuel Ham_GB_2e manuel.qnx 1.10.2001 16:22 Page 14