Filter
Top Products
20 FX40HR TREADMILL
ASSEMBLY
STEP 2:
X2
First connect the Motion Control Wire Middle Section (308) to Motion Control Wire
Lower Section (208) as shown.
804
Insert the Handlebar (201) into the Upright Tube (301) and secure using two M8 x
15mm Bolts (804), Four M8 x 50mm Bolts (805) and attach Handlebar Lower Cover
(202) to Base Frame (401).
805
X4
308
208
804
804
201
201
301
301
202
202
805
805