Filter
Top Products
10
Travel settings:
Your AC bicycle gives you the ability to change the travel from 4.5” to 5.15” to
6” with minimal effort. This is accomplished with three positions of the upper
shock pivot bolt (see Drawing # 5).
To change the travel (See Drawing #5):
1. Using a 6 mm Allen wrench, remove the upper shock mounting bolt.
2. Pivot the shock backward or forward to align the eyelet with one of the three
holes. The forward most position is 4.5” travel, the middle position is 5.15”
travel, and the rear position is 6” travel.
3. Install the bolt and tighten to the proper torque of 100-120 Kgf/cm (86-95
in.-lbs.).
4. After any adjustment is made to travel, you will need to readjust all air
pressure or spring preload settings described in the preceding sections.
Drawing #5