Filter
Top Products
FR70QuickStartManual 7
Your device may include
either a hard strap monitor or a
soft strap monitor.
The heart rate monitor is on standby
and ready to send data. Wear the
heart rate monitor directly on your
skin, just below your breastplate.
It should be snug enough to stay in
place during your run.
1. Connect one side of the strap to
the heart rate monitor module.
2. Wet both electrodes on the back
of the heart rate monitor strap
to create a strong connection
between your chest and the
transmitter.
Electrodes
Electrodes
3. Wrap the strap around your chest,
and connect the other side.
The Garmin logo should
be right-side up.
4. Bring the FR70 within range (3 m)
of the accessory. Press
until the training page appears.
If the heart rate data is
erratic or does not appear, you
may have to tighten the strap on
your chest or warm up for 5–10
minutes.
The foot pod is on standby and ready
to send data as soon as you install it
or move it.
1. Press the tab on the lace clip. Lift
and separate the foot pod from
the lace clip.
2. Loosen your shoe laces.