Freestyle Navigator 2.0 Watch User Manual


 
Toreducecarbonfootprint,these
Freestyleinstructionsareprintedwith
soyinksonrecycledpaper.
ENGLISH
TO USE THE RECALL FUNCTION:
1. PressS3buttontoselectRECALL
mode.
2. PressS1buttontoscrollthrough
therecordedindividuallaptimeand
totalelapsedtime.
NOTE:Therecallfunctionisavailable
onlywhenthereislaprecord.The
message“NOLAPS”willbedisplayed
ifthereisnolaprecord.
NOTE:Thelaprecordwillbecleared
whenthechronographisreset.
TO SET THE TIMER:
1. PressS3buttontoselectTIMER
mode.
2. PressandholdS2buttonfor
around2seconds,thetimerselec
tionwillblink.
3. PressS1buttontotogglebetween
timerinterval1andtimerinterval2
toset.
4. PressS3button,theseconddigits
willblink.
5. PressS1buttontosetthesecond
digits.Holdingdownthebuttonwill
speeduptheprocess.
6. PressS3button,theminutedigits
willblink.
7. PressS1buttontosettheminute
digits.Holdingdownthebuttonwill
speeduptheprocess.
8. PressS3button,thehourdigitswill
blink.
9. PressS1buttontosetthehour
digits.Holdingdownthebuttonwill
speeduptheprocess.
10.PressS3button,theaction-at-end
selectionwillblink.
11.PressS1buttontoselectamongCS
(CountStop),CR(CountRepeat)
andCCU(CountUp).
12.Afternishedmakingalltheset-
tings,pressS2buttontoconrm.
NOTE:Illustrationoftheaction-at-end
selections:
a)CS(CountStop)–thetimerwill
stopwhenthecountdownteaches
zero.
b)CR(CountRepeat)–thetimer
willrepeatthecountdownwhenthe
countdownreacheszero.
c)CCU(CountUp)–thetimercount
uptoamaximumof23hours59
minutesand59secondswhenthe
countdownreacheszero.
NOTE:Thetimercannotbeactivated
ifthevalueoftimerinterval1isset
as0:0’00”.
TO USE THE TIMER:
1. PressS3buttontoselectTIMER
mode.
2. Thetimerwillbedisplayedinits
currentstate–reset,running,or
stopped.
3. Toresumeacounting,pressS1
buttontoresumefromwhereitleft
off.
4. Tostartanewcounting,reloadthe
timerrst.
PressS1buttontostopcounting
andthenpressS2button.
5. Afterreachingzeroinacountdown,
atunewillbeemitted.Tostopthe
tune,pressanybutton.
NOTE:Youcanleavethetimerrunning
whileswitchingovertootheroperating
modes.
TO SET THE ALARM:
1. PressS3buttontoselectALARM
mode.
2. PressS2buttontoselectamong
alarmentries1,2and3toset.
3. PressandholdS2buttonforaround
2seconds.Theminutedigitswill
blink.
4. PressS1buttontosettheminute
digits.Holdingdownthebuttonwill
speeduptheprocess.
5. PressS3button,thehourdigitswill
blink.
6. PressS1buttontosetthehour
digits.Holdingdownthebuttonwill
speeduptheprocess.
7. PressS3buttonthealarmfre
quencywillblink.
8. PressS1buttontoselectamong
daily(DLY)andindividualday(of
theweek)only–Sunday(SUN),
Monday(MON,Tuesday(TUE),
Wednesday(WED),Thursday(THU),
Friday(FRI)andSaturday(SAT).
9. Afternishedthesettings,pressS2
buttontoconrm.
NOTE:Thealarmwillautomaticallybe
activatedafterbeingset.
NOTE:Thealarmwillworkaccording
toHOMETIMEorFOREIGNTIME(de-
pendsonyourselectionintimemode).
TO USE THE ALARM:
InALARMmode,
1. PressS2buttontoselectamong
alarmentries1,2and3toset.
2. PressS1buttontoactivatethe
alarm.Thealarmindicator
will
bedisplayed.
3. PressS1buttonagaintodeactivate
thealarm.Themessage“OFF”will
bedisplayed.
WHEN AN ALARM GOES OFF:
A20-secondalarmtunewillbeemitted
atthedesignatedtimewhenthealarm
isactivated.Tostopthetune,press
anybutton.
TO USE THE BACKLIGHT:
PressS4buttontoturnontheback-
lightforaround3seconds.
BEZEL-ACTIVATED BACKLIGHT
FUNCTION:
1. PressandholdS4buttonforaround
3secondsactivatedordeactivate
thebezel-activatedbacklightfunc-
tion.
2. Whenthefunctionisactivated,the
lightbulbicon willbedisplayed.
Youcanthenturnonthebacklight
foraround3secondsbytouching
thebezelofthewatch.
NOTE:Tousethebezel-activated
backlightfunction,thecasebackofthe
watchmustbeindirectcontactwith
yourskinduringwear.
LOW BATTERY DETECTION:
Whenthebatteryofthewatchisclose
todepletion,thebatterylowindicator
willbedisplayed.
FS8127-NAVIGATOR2.0-1067-MR01