Filter
Top Products
If you are using this product for the first time,
follow these steps to install the batteries, turn the
product on and adjust the screen contrast.
1. Turn the product over.
2. Use a small Phillips screwdriver to remove the
screw to the battery cover and then remove the
cover.
3. Place four AAA batteries inside the case, fol-
lowing the diagram.
4. Replace the battery cover.
5. Press ON/OFF.
A brief demonstration appears.
6. Press CLEAR to stop the demo.
The Ready screen appears.
7. Press or repeatedly to adjust the screen
contrast.
You can adjust the contrast only at the Ready
screen.
√ Disabling the Demonstration
You probably do not want to view the demon-
stration every time you turn on this product. To
disable the demonstration, type --D and then
press ENTER. To re-enable it, do the same.
Getting Started
4