Filter
Top Products
7
Adjusting The Rim Height
Adjusting The Rim Height
• As assembled, the rim height is 3' (1 m).
• To raise the rim height to 4', 5', or 6' (1.2 m, 1.5 m or 1.8 m), place your
foot on the base and pull up on the backboard with both hands to remove
the upper post from the base. You may need to rock the upper post to
loosen it from the base.
IMPORTANT! Since this may require a lot of force, DO NOT stand with your
face or chest above the backboard.
• Pull the lever on the lower post down.
• Insert the upper post into the lower post with the net positioned over the
wheels on the base.
• Push the lever into one of the slots on the side of the upper post at the
desired height.
5
4
6
Slots
Lever
Upper Post
Lower Post
• To lower the rim height: while holding the upper post, push the lever on
the lower post down. Lower the upper post and push the lever into the slot
at 4' or 5' (1.2 m or 1.5 m).
• To raise the rim height: simply lift the upper post and push the lever into
the slot at 5' or 6' (1.5 m or 1.8 m).
5
4
6
Lever
Base
Slots
Upper Post
Lower Post
2
3
1
6
4
5
Backboard
Base
Upper Post