Filter
Top Products
EVO3 MOTORIZED TREADMILL
Visit us at: www.evofitness.com
20
ASSEMBLY
STEP 11:
Insert the Handlebar Rear End Cap – Left #1 (10) and Handlebar Rear End Cap – Left #2 (11) over the Left Upright (28) and
secure in place using M8 x 25mm Screws (17) and M8 x 19mm Screws (16). Insert the Handlebar Rear End Cap – Right #2
(13) and Handlebar Rear End Cap – Right #1 (12) over the Right Upright (29) and secure in place using M8 x 25mm Screws
(17) and M8 x 19mm Screws (16).