Filter
Top Products
Step 5:
Cap Leg Curl (207) with three 2" Sq
End Plugs (215). Attach Stopper (220)
to Leg Curl (207) using 3/8" x 5/8" Inner
Hex Head Screw (232). Insert two 1/2"
Steel Bushings (225) to the hole in Leg
Curl (207). Attach Leg Curl (207) to the
bracket on Inner Tube (206) using Axle
(219), two 5/16" Washers (236), two
5/16" Spring Washers (239), and two
5/16" x 5/8" Inner Hex Head Screws
(233). Lock Leg Curl (207) with Lock
Pin (224).
Insert two Bolsters (208) through the
holes in Leg Curl (207) and fix with 5/16"
x 1/2" Set Screw (234). Slide two 4"
Foam Pads (211) onto Bolster (208)
and cap with 1" End Plugs (217).
ASSEMBLY
assembly instructions
-10-
202
217
211
208
217
211
215
234
215
208
211
217
211
217
234
220
207
225
232
215
233
206
224
233
239
239
236
219
236
225