Filter
Top Products
2. Use the buttons to select the desired memory page.
3. Press the EDIT button (7) until ‘_’ appears in the display (about 3
seconds).
4. Use the tuning knob to select the desired number or letter.
5. Press the PAGE/TIME button to select the next ‘_’.
6. Repeat until 4 letters/numbers are selected.
7. Press PAGE/TIME when finished.
ACCESSINGWHAT IS STORED INTO MEMORY
1. Enter MEMO mode by pressing the PAGE/TIME button (4), causing
MEMO to appear in the display.
2. Select the desired memory page with the buttons.
3. Select the desired memory with buttons F1-7.
CHECKING MEMORY CAPACITY
While holding down the CHECK button (14), turn the tuning knob to
select memory pages. Empty memories do not have the box around
them.
CHECKING PAGES AND MEMORIES
Checking allows reviewing of pages and their contents, even while
listening.
1. Press and release the PAGE/TIME button (4), causing PAGE to
appear in the display.
29
2. Press or hold down the CHECK button (14) and turn the tuning
knob (40) to select the desired page.
3.While holding down the CHECK button press one of the F1-F7
buttons noting that the stored frequency shows in the display.
USING THE PAGE COPY/PASTE FUNCTION
This feature enables copying memory contents from one page to
another.
1. Press and release the PAGE/TIME button (4), causing PAGE to
appear in the display.
2. Press or hold down the CHECK button (14) and turn the
tuning knob (40) to select the page to be copied.
3.While holding down the CHECK button (14) press and release the
PAGE/TIME button (4). This copies the page.
4. Press or hold down the STORE button (16) and turn the
tuning knob (40), selecting the paste-to page.
5.While holding down STORE press and release PAGE.This pastes the
content of the page.
ERASING MEMORY
1. Enter MEMO mode by pressing the PAGE/TIME button (4), causing
MEMO to appear in the display.
2. Select the desired memory page with the buttons.
WORKING WITH MEMORY continued
G5 OPERATION MANUAL
28
WORKING WITH MEMORY continued