Filter
Top Products
ET288/ET388
10
n STEP 1
Remove all the parts from the carton and lay the main base frame on a flat level surface.
n STEP 2
Connect the cable from the base frame (49) to the cable in the right side upright tube (50)
and slide the tube into the base frame tube. Be careful not to pinch the wire harness.
Slide the left upright tube into the base frame tube.
49
50
n STEP 3
Install, and just hand tighten for now, all eight 5/16 x 1/2 socket head bolts (130). Now
tighten all eight bolts as tight as possible.