Filter
Top Products
20
THE INFORMATION MODE
The console features an information mode that keeps
t
rack of the total number of hours that the treadmill has
been used and the total distance that the walking belt
h
as moved. The information mode also allows you to
select miles or kilometers as the unit of measurement
and to turn on and turn off the display demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The Time display will show
the total number of hours
the treadmill has been used.
The Distance/Incline display
will show the total number of
miles (or kilometers) that the
walking belt has moved.
An “E” for English miles or
an “M” for metric kilometers
will appear in the
Calories/Pulse display.
Press the Speed increase
button to change the unit of
measurement if desired.
The console features a dis-
play demo mode, designed
to be used if the treadmill is
displayed in a store. While
the demo mode is turned
on, the console will function
normally when you plug in the power cord, press the
power switch into the reset position, and insert the key
into the console. However, when you remove the key,
the displays will remain lit, although the buttons will not
function. If the demo mode is turned on, a “d” will ap-
pear in the Speed display while the information mode
is selected. To turn on or turn off the display demo
mode, press the Speed decrease button.
To exit the information mode, remove the key from the
console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
s
tereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the con-
s
ole through the audio jack.
To use the audio jack, locate the audio wire and plug it
into the audio jack near the iFit slot. Then, plug the
audio wire into a jack on your MP3 player, CD player,
or other personal audio player. Make sure that the
audio wire is fully plugged in.
Next, press the Play but-
ton on your MP3 player,
CD player, or other per-
sonal audio player.
Adjust the volume level
on your personal audio
player or press the
Volume increase and
decrease buttons on the console.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face instead of on the console.
Volume Decrease
Volume Increase