Filter
Top Products
3
A
B
1. Note the difference between the front
and rear stabilizers. The larger stabilizer
with wheels goes in the rear of the indoor
cycle (under the fl ywheel).
3. Attach the front stabilizer to the front
of the main frame with four 5mm stabi-
lizer bolts and stabilizer washers using
the 5mm Allen wrench. Tighten the
inner bolts fi rst, and then proceed to the
outer bolts to ensure the foot is secured
properly and evenly.
CHAPTER 3: indooR CyClE AssEmbly
Attach Stabilizer Feet
1. Remove 6mm bolt in main frame as-
sembly using 6mm Allen wrench. The
6mm bolt can be kept in place of the
large L handle for a more permanent
placement of the handlebar height.
2. Insert the handlebar post into the head
tube and secure it by inserting the large L
handle into the main frame assembly on
the right side of the indoor cycle (chain
guard side).
D
Attach Handlebar
A
2. Attach the rear stabilizer to the rear of
the main frame with four 5mm stabilizer
bolts and stabilizer washers using the
5mm Allen wrench. Tighten the inner
bolts fi rst, and then proceed to the outer
bolts to ensure the foot is secured prop-
erly and evenly.
Handlebar post
Rear stabilizer
Front stabilizer
M
Large L
handle
C
Main frame
assembly
A
B
Rear stabilizer
Front stabilizer
3. Slide the water bottle holder and water
bottle spacer onto the road style handle-
bar.
Water bottle holder
Handlebar
Water
bottle
spacer
Water
bottle
holder
Handlebar
4. Secure the water bottle holder and
handlebar together using the previously
removed, two 4mm spacer bolts and
washers, on the underside of the handle-
bar.
Water bottle
spacer
5. Carefully slide the road style handlebar
assembly onto the handlebar post.
Secure the plastic end cap to the
handlebar post using two end cap screws
with the Phillips screwdriver side of the
6mm Allen wrench.
6. Once the road style handlebar is in
place, secure it with the small L handle on
the right side of the indoor cycle (chain
guard side).
Small L
handle
Handlebar post
Handlebar
End cap