Coleman X2 Camping Equipment User Manual


  Open as PDF
of 2
 
Things You Should Know
•
Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside surfaces of your tent. Condensation
is caused by water vapor from your breath, perspiration, or any wet clothing inside your tent. It is NOT LEAKAGE through the tent
fabric. It can be minimized by removing wet clothing from your tent and by providing good ventilation through the tent.
•
Never store tent, even for a short period of time, without
drying it thoroughly and brushing off caked dirt. Do not pack
stakes or poles inside your tent. Use separate storage bag.
•
STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE
ITSELF. NEVER PULL ON THE TENT FABRIC OR TENT STAKE
LOOP TO REMOVE STAKE.
•
TENT POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER
DURING STORAGE.
3600 N. Hydraulic • Wichita, Kansas 67219
1-800-835-3278 • www.coleman.com
3
Attach Tent
– Layout the tent. (illus. 4)
– Position the tent in under the Rainfly
– Starting at the back of the tent, clip the tent to the
Rainfly in the corners and then the side. (illus. 6)
– Attach the top of the tent to underside of the
Rainfly with toggle and loops.
– Optional ground cloth in vestibule can be removed
or attached and clipped to the webbing at front of
the Rainfly. (illus. 6)
– Stake out rainfly doors, keep rainfly taut. (illus. 6)
– Attach Guy Lines to Guy Wings on back and sides
of the Rainfly and stake out. (illus.6).
illus. 4
Tent positions
in under Rainfly
illus. 6
Completed tent
with Rainfly.
Tent toggles to loops
on underside of Rainfly
illus. 5
Tent clips onto
pole stake loop
PRINTED IN CHINA
© 2006 The Coleman Company, Inc. All Rights Reserved.
 previous