Coleman 9271-210 Tent User Manual


  Open as PDF
of 2
 
DURANGO
™
FAMILY CABIN
™
20'X10'
1
Layout & Positioning of Tent
–Layout and position tent with door
facing desired direction. (illus. 1)
–Stake down tent, starting with
the corners. Do not stretch
too tight. Angle the stakes
slightly toward the tent.
(illus. 2) Keep the floor taut.
–Unzip the door.
2
Assemble & Place Roof Poles
–Assemble all shock-corded
roof poles. When assembled will
form a continuous arch with both
ends pointing down. (illus. 3)
–Select center roof poles (longer,3 section)
and insert them diagonally through the two
center roof sleeves. They cross and form an
“X”. (illus. 1 & 4)
–Select end roof poles (shorter, 2 section).
and insert them through the roof sleeves
at each end of the tent. (illus. 1)
When You Are Ready To
Set Up Your Tent
–Select a level campsite clear
of rocks, branches and other
hard or sharp objects.
–Do not set up your tent
under trees.
–For best results in windy
conditions, position the end
of tent into the wind.
–See owners manual for
more tips
Center Curved Roof Poles
Part No. 9271-205
End Curved Roof Poles
Part No. 9271-206
End Brace Poles
Part No. 9271-203
Center Brace Poles
Part No. 9271-202
Rainfly Poles
Part No. 9271-204
Rainfly Part No. 9271-201
Instructions apply to Part Number 9271-210
illus. 3 Three section curved roof pole assembly.
illus. 4 Curved roof pole system shown
inserted diagonally through pole sleeves.
illus. 2
Stake loops
properly staked
Front door
End roof
sleeve
Center curved roof poles diagonally
through pole sleeves
illus. 1
Pole sleeves
Shock corded poles
Forms an arch
Shock-corded
POLE ASSEMBLY PARTS