Filter
Top Products
FIRM/INFLATE
SOFT
INFLATION INSTRUCTIONS
1. Ensure your Deluxe Quickbed
®
Airbed is at room temperature
prior to inflating.
2. Place your bed on the floor or
other surface free of obstructions
or sharp objects that may
damage your product
(see Figure 1).
3. Snap pump into housing
(see Figure 2A & 2B).
4. Close the Double-Lock™
Release Valve by pushing inward
to activate the internal seal and
then close the cap
(see Figure 3).
5. Plug cord into any standard
polarized 110 Volt AC
electric outlet.
6. Push Comfort Control™ switch to
FIRM/INFLATE (see Figure 4 &
5). Bed will NOT over inflate
to bursting.
7. Lie on the bed to adjust the
firmness to your desired comfort
level. To make the bed softer,
press the SOFT switch on the
Comfort Control™ hand control.
To increase the firmness press
FIRM/INFLATE on the hand
control (see Figure 4).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Deflation End
Deflation
End
DEFLATION & STORAGE
INSTRUCTIONS
1. Remove pump from housing
(see Figure 2 & 6).
2. Open the cap and pull out firmly
on the Double-Lock™ Release
Valve to open internal seal
(see Figure 7).
3. Place DEFLATION end of pump
inside the Double-Lock™
Release Valve (see Figure 8).
4. Plug in the pump and press the
FIRM/INFLATE switch on the
Comfort Control™ hand control
(see Figure 4) to turn the pump
on. Do not press SOFT; this
switch only works when pump is
engaged with housing.
5. Once bed is completely deflated,
push in with the pump. This will
close the valve around the
internal post. Then close the cap
(see Figure 8 & 9).
6. Snap the pump back into housing
(see Figure 2 & 10).
7. Carefully roll/fold bed around
pump for storage (see Figure
11).
8. Place bed in provided carry bag.
Bed should be stored at room
temperature (above 50°F / 10°C
and below 90°F / 32°C).
CLEANING
CAUTION: Before cleaning any area of this product (pump or bed)
make sure pump is unplugged.
Coleman
®
Bed
The bed itself may be cleaned using a mild soap and water. Do not
use strong chemicals or detergents. Allow your bed to completely dry
before storing.
Mattress Pad/Topper
Removable quilted poly/cotton mattress pad may be machine washed
in warm water with a mild soap or detergent. Tumble dry on LOW
HEAT.
TROUBLESHOOTING
1. Check to make sure pump is properly snapped into the housing. If it
is not fully engaged in housing neither the FIRM/INFLATE or SOFT
feature on the hand control will work properly.
2. If your product seems to be leaking air, ensure that the
Double-Lock™ Release Valve is properly closed. Valve should
appear depressed into itself when properly closed. Make sure the
valve is sealed around the internal stopper before closing the cap.
Do this by pressing in on the valve before closing the cap.
REPAIR
For inadvertent punctures a patch is included. Please use this patch
with a repair kit that can be purchased at most retailers or you can
purchase a Coleman
®
repair kit (model #806-153T) by calling
customer service at 1-800-835-3278 or visit www.coleman.com.
ONE YEAR LIMITED WARRANTY
The Coleman Company, Inc. (“Coleman”) warrants that for a period of one year
from the date of purchase, this product will be free from defects in material and
workmanship. Coleman, at its option, will repair or replace this product or any
component of the product found to be defective during the warranty period.
Replacement will be made with a new manufactured or remanufactured product or
component. If the product is no longer available, replacement may be made with a
similar product of equal or greater value. This is your exclusive warranty. This
warranty is valid for he original retail purchaser from the date of initial retail
purchase and is not transferable. Keep the original sales receipt. Proof of purchase
is required to obtain warranty performance. Coleman dealers, service centers, or
retail stores selling Coleman
®
products do not have the right to alter, modify or in
any way change the terms and conditions of this warranty. This warranty does not
cover normal wear of parts or damage resulting from any of the following:
negligent use or misuse of the product, discoloration or fading, use contrary to
specified instructions, disassembly, repair or alteration by anyone other than
Coleman or authorized service center. Further, the warranty does not cove Acts of
God, such as fire, flood, hurricanes and tornadoes. COLEMAN SHALL NOT BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED
BY THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. EXCEPT TO
THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS
LIMITED IN DURATION TO THE DURATION OF THE ABOVE WARRANTY.
SOME STATES, PROVINCES OR JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR LIMITATIONS TO HOW LONG AN IMPLIED WARRANTY LASTS,
SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU.THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE OR PROVINCE TO
PROVINCE.
HOW TO OBTAIN WARRANTY SERVICE: Take this product to an authorized
Coleman service center. you can find the nearest authorized Coleman service
center by calling 1-800-835-3278 or TDD 316-832-8707. If a service center is not
conveniently located, attach a tag to the product that includes your name, address,
daytime telephone number and description of the problem. Include a copy of the
original sales receipt. Carefully package the product and send either by UPS or
Parcel Post with shipping and insurance prepaid to:
For products purchased in the United States:
The Coleman Company, Inc.
3600 North Hydraulic
Wichita, KS 67219
DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
If you have any questions regarding this warranty, please call
1-800-835-3278 or TDD 316-832-8707.
B
A