Coleman 5155B Camping Equipment User Manual


 
8
Make sure lantern is cool.
Move lantern away from flame (including pilot lights) and other
ignition sources.
Remove propane cylinder from lantern.
Replace protective cap on propane cylinder.
Lantern can be placed in base for secure storage.
To Store
DANGER
• EXPLOSION - FIRE HAZARD
Never store propane near high heat, open flames, pilot lights, direct sunlight,
other ignition sources or where temperatures exceed 120 degrees F (49°C).
The cylinder must be disconnected when the lantern is in storage.
To Light continued
To Turn Off
NOTE: If lantern does not light,
repeat above step. If the lantern
does not light after several attempts,
check for a spark while clicking the
valve. If no spark is present, check
the electrode gap. The gap should
be about 1/8" (3 mm). Bend flat
electrode to set gap. If the lantern is
wet due to rain, high humidity, etc.,
the valve may not spark. Use light-
ing procedure for match light version
lanterns.
1/8"
(3 mm)
Brightness may be adjusted with
fuel valve.
Turn fuel valve off.