Filter
Top Products
6
To Set Up continued
■ Light bottom of mantle evenly. Burn until nothing but white ash remains.
Once the mantle has been burned, it is very fragile. Be careful not to touch
it with finger or match.
■ Complete assembly.
■ Take lantern outdoors away from
ignition sources.
■ Turn fuel valve off.
■ Remove protective cap from top
of propane cylinder. Save cap for
use in storing.
■ Note: Use Coleman 16.4 oz. disposable propane cylinders. The LP-gas
cylinder(s) used with lanterns must be constructed and marked in accor-
dance with the specifications for LP-gas cylinders of the U.S. Department of
Transportation or
Transport Canada, CAN/CSA B339
.
WARNING
• Replace any mantle with a hole in it. A hole can cause lantern to overheat
and create a hazard. Never operate lantern without heat shield.
To Light
WARNING
If you smell gas:
1. Do not attempt to light appliance.
2. Extinguish any open flame.
3. Disconnect from fuel supply.
4. Call 1-800-835-3278.