Coleman 2000010648 Camping Equipment User Manual


 
STITCH LINE
SIDEWALL SET UP INSTRUCTIONS
Before You Begin
• Ensuretheshelterissetupcorrectlybycarefullyreviewing
andfollowingallsafetyandinstallationinstructionsprovided
withtheshelter.
• Thesidewallmaybeplacedinanyoftheopeningsofthe
ColemanShelter.
• Sheltershouldbesetatthehighestpositionwhenused
withsidewall.
2. Stretchsidewalldownward
untiltaut,inserthooksat
thetwobottomcornersof
sidewallintoholesonthe
lowerpartofframeposts.
(Fig.3)
1. Unfoldsidewallwiththe
“Lantern”logofacing
outside.Stretchelastic
strapsandhookclipsat
thetwotopcornersof
sidewalltothemetalrings
onthetopoftwoframe
posts.(Fig.1&2)
3. Locateallhook&loopfastenersonedgesofsidewall,then
wraparoundframe&framepoststosecure.(Fig.4&5)
4. Stretchwebbingloopsalong
thebottomedgeofsidewall,
thensecurewithstakes.
(Fig.6)
5. Installtheothersidewallfollowingthesamewayasthesidewall
with“Lantern”logo.(Fig.7)
Fig. 2
Fig. 3
Fig. 4
Fig. 6
ToobtainadditionalSidewallunits,
seeyourlocalretailerorvisitwww.coleman.com.
CompletedShelterwithsidewall
4010015700 (ECN20020545-01)
TheColemanCompany,Inc.•3600NorthHydraulic•Wichita,Kansas67219U.S.A.
1-800-835-3278•www.coleman.com
MADE IN CHINA
©2011TheColemanCompany,Inc.Allrightsreserved.
Coleman
®
, ,and areregisteredtrademarksof
TheColemanCompany,Inc.
ThistentmeetstheammabilityrequirementsofCPAI-84.The
fabricmayburnifleftincontinuouscontactwithanyamesource.
Theapplicationofanyforeignsubstancetothetentfabricmay
rendertheame-resistantpropertiesineffective.
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY
FROM THIS TENT FABRIC.
Fig. 1
Disassemble the Sidewall
1.Removestakesalongthebottomedge.
2. Detachhooksatthetwobottomcornersofsidewallfromholes
onframeposts.
3.Detachallremainingfasteners.
To Store
1. Allstakesmustbeplacedinthestoragebagtopreventdamage
tothefabricitemsplacedinthecarrycase.
2. Makesureallcomponentsarecleananddrybeforeplacingin
carrycase.
3. Storeinaclean,dryarea.
Fig. 5
Install the Sidewall
Fig. 7
Model 2000010648